Cube Autopilot


Topic Replies Activity
AUTOTUNE of large hexacopter with unusual dimensions 3 September 26, 2019
Cube Orange No compass 3 3 September 24, 2019
Cube screws 4 September 23, 2019
Copter: onboard mag calibration does not start if HereFlow is used 10 September 23, 2019
Cube Orange Firmware 17 September 22, 2019
RSSI not working 2 September 19, 2019
Which compass to use? 4 September 18, 2019
Kore Carrier Board 3 September 18, 2019
Facing issues with DISARMING ON LANDING 4 September 18, 2019
Pin description error in Cube documentation 1 September 17, 2019
EKF2 inconsistent YAW 21-93 degrees 9 September 16, 2019
2018 manufactured black cube with NuttX os 4 September 15, 2019
Orange Cube Firmware 3 September 15, 2019
New Carrier Board 8 September 14, 2019
HexaCopter with 5 or 4 motors 9 September 13, 2019
Batt_Volt_Mult issue and inconsistent Voltage reading 3 September 12, 2019
Yellow Cube Firmware Issue 8 September 11, 2019
Place to send a cube fix? 2 September 10, 2019
Disable GCS failsafe when in Manual Mode 5 September 10, 2019
Cube Blue and Black IMU pitch oscillation 5 September 6, 2019
Uncommanded Ascent 18 September 6, 2019
DJI E5000 propulsion system compatibility with the Cube 6 August 31, 2019
Use all sensors on Cube Black + 2 Here2 GPS 8 August 27, 2019
Unable to connect with QGC with Pixhawk Cube 2.1 7 August 27, 2019
Drone stops during mission, floats around does not respond to RTL 6 August 24, 2019
Toilet bowl with 2.1 black cube! 24 August 24, 2019
"fmuv3" vs "CubeBlack" firmware 25 August 22, 2019
[Solved] Your board has a Critical 3 August 21, 2019
Can newer cube be used in 3DR solo? (does it have 5v PWM) 11 August 19, 2019
Please help to run Motor test using Mission Planner and PX 2 August 16, 2019