# Aircraft

**URL:** https://discuss.cubepilot.org/c/cube-powered-robots/fixed-wing-cube-autopilot-controlled-aircraft/35.md

[Latest](https://discuss.cubepilot.org/latest.md) · [Categories](https://discuss.cubepilot.org/categories.md)

---

## [About the Aircraft category](https://discuss.cubepilot.org/t/about-the-aircraft-category/14452)

<div class="topic-metadata">

**Author:** [@Gary\_Mortimer](https://discuss.cubepilot.org/u/Gary_Mortimer)\
**Replies:** 0\
**Last updated:** [28 November 2024 06:47 UTC](https://discuss.cubepilot.org/t/about-the-aircraft-category/14452 "2024-11-28T06:47:28Z")

</div>

Your aircraft builds here

---

## [High-Temperature Desert UAV Testing using CubePilot Ecosystem](https://discuss.cubepilot.org/t/high-temperature-desert-uav-testing-using-cubepilot-ecosystem/17541)

<div class="topic-metadata">

**Author:** [@Fares](https://discuss.cubepilot.org/u/Fares)\
**Replies:** 0\
**Last updated:** [11 May 2026 03:40 UTC](https://discuss.cubepilot.org/t/high-temperature-desert-uav-testing-using-cubepilot-ecosystem/17541 "2026-05-11T03:40:21Z")

</div>

Operating UAV systems in the Gulf region presents a completely different engineering challenge compared to standard environments. We recently initiated a dedicated high-temperature desert UAV evaluation program in the U…

---

## [Servo control](https://discuss.cubepilot.org/t/servo-control/14796)

<div class="topic-metadata">

**Author:** [@yak-54](https://discuss.cubepilot.org/u/yak-54)\
**Replies:** 0\
**Last updated:** [18 February 2025 12:14 UTC](https://discuss.cubepilot.org/t/servo-control/14796 "2025-02-18T12:14:22Z")

</div>

Hi all i have a large UAV 3.5 m wing span 11 servos pulling 3 to 5 amp each that is using a Frsky servo power dissolution board is there a way to pass the ardupilot servo control to the frsky RB25 by sbus out from one …

---

## [Pixhawk drone fly away](https://discuss.cubepilot.org/t/pixhawk-drone-fly-away/13952)

<div class="topic-metadata">

**Author:** [@PX4\_CUBE](https://discuss.cubepilot.org/u/PX4_CUBE)\
**Replies:** 1\
**Last updated:** [15 August 2024 05:00 UTC](https://discuss.cubepilot.org/t/pixhawk-drone-fly-away/13952 "2024-08-15T05:00:13Z")

</div>

Our drone uses orange cube plus. When it takes off in AUTO mode, it deviates from the correct route and seems to be flying in an uncontrolled state. Switching to LOITER mode does not stop the drone. Switching to RTL mode…

---

## [Fail: Large Compass Offset - during VTOL Transition to FWBA from QLOITER](https://discuss.cubepilot.org/t/fail-large-compass-offset-during-vtol-transition-to-fwba-from-qloiter/13812)

<div class="topic-metadata">

**Author:** [@Aleem\_Siddiqui](https://discuss.cubepilot.org/u/Aleem_Siddiqui)\
**Replies:** 2\
**Last updated:** [22 July 2024 06:26 UTC](https://discuss.cubepilot.org/t/fail-large-compass-offset-during-vtol-transition-to-fwba-from-qloiter/13812 "2024-07-22T06:26:26Z")

</div>

I am using a 3D Printed Quadplane, the firmware I am using is, V4.5.1. with a Pixhawk Cube Orange+ and GPS is Here 3. I had a maiden for Transition, The plane was fine in Q\_Loiter and Q\_Stabilize. upon shifting to FWBA, …