# Geo-referencing photos using Mission Planner

**URL:** <https://discuss.cubepilot.org/t/geo-referencing-photos-using-mission-planner/7544>\
**Category:** Mission Planner\
**Created:** [15 October 2021 06:54 UTC](https://discuss.cubepilot.org/t/geo-referencing-photos-using-mission-planner/7544 "2021-10-15T06:54:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jacek\_Jablonski](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/jacek_jablonski/32/352_2.png) [@Jacek\_Jablonski](https://discuss.cubepilot.org/u/Jacek_Jablonski)\
**Post date:** [15 October 2021 06:54 UTC](https://discuss.cubepilot.org/t/geo-referencing-photos-using-mission-planner/7544/1 "2021-10-15T06:54:29Z")

</div>

Hi  
I have serious problems with geo referencing photos using Mission Planner.

 ![InkedMP_LI](https://discuss.cubepilot.org/uploads/default/original/2X/9/969102da53abf6095c65ab1ffa311f1b9759140f.jpeg)  
When I checked the box “GPS2” whole GPS data are the same as when I don’t select that box. I use two different GPS. First GPS is HERE2 connected via CAN, second of them is Emlid M2 connected via UART on the GPS2 connector. In settings I set GPS\_AUTO\_SWITCH = 0  
( Use only primary GPS HERE2). Why when I checked GPS2 box, geo referencing are with HERE2 instead of EMLID M2?

---

<div class="post-metadata">

**Author:** ![Alvin](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/alvin/32/1000_2.png) [@Alvin](https://discuss.cubepilot.org/u/Alvin)\
**Post date:** [18 October 2021 08:51 UTC](https://discuss.cubepilot.org/t/geo-referencing-photos-using-mission-planner/7544/2 "2021-10-18T08:51:16Z")

</div>

Are both GPS have their data recorded in log?