Here2 GPS Showed Disabled

I am unable to get Here2 GPS working with Cubeorange FC.
QGC shows ‘disabled’ in front of GPS, in both Ardupilot and PX4.

Currently, the GPS is set to I2C mode and I tried connecting it to the GPS1 port as well as I2C port of the FC, but none of them seem to work.

The GPS lights flash with the following pattern:
Red Circle LED: Flashing on/off at regular intervals.
Blue Lights: Fading in/out.

Any help would be greatly appreciated.
Thank you.

Can you try Mission Planner with Ardupilot?
How did you connect the Here2 to both GPS1 and I2C port? They have different pin numbers.