# Here2 preArm checks

**URL:** <https://discuss.cubepilot.org/t/here2-prearm-checks/1028>\
**Category:** Uncategorized\
**Created:** [8 June 2019 06:32 UTC](https://discuss.cubepilot.org/t/here2-prearm-checks/1028 "2019-06-08T06:32:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![yak-54](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/yak-54/32/2271_2.png) [@yak-54](https://discuss.cubepilot.org/u/yak-54)\
**Post date:** [8 June 2019 06:32 UTC](https://discuss.cubepilot.org/t/here2-prearm-checks/1028/1 "2019-06-08T06:32:28Z")

</div>

I am using plane 3.9.8 with 2 here2 gps on Can1 and Can2  
if i try to arm it i get

PreArm: GPS Hoop 655.3 ( Needs 2.5 )

---

<div class="post-metadata">

**Author:** ![yak-54](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/yak-54/32/2271_2.png) [@yak-54](https://discuss.cubepilot.org/u/yak-54)\
**Post date:** [9 June 2019 08:21 UTC](https://discuss.cubepilot.org/t/here2-prearm-checks/1028/2 "2019-06-09T08:21:38Z")

</div>

ok i swapped it back to serial 3 and 4 and the plane now arms so its must be can bus issue

---

<div class="post-metadata">

**Author:** ![yak-54](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/yak-54/32/2271_2.png) [@yak-54](https://discuss.cubepilot.org/u/yak-54)\
**Post date:** [10 June 2019 09:03 UTC](https://discuss.cubepilot.org/t/here2-prearm-checks/1028/3 "2019-06-10T09:03:40Z")

</div>

ok worked it out on my config is turn off blend gps and set to use best
