# HereLink Air unit powered from Kore

**URL:** <https://discuss.cubepilot.org/t/herelink-air-unit-powered-from-kore/4561>\
**Category:** HereLink\
**Created:** [9 September 2020 14:35 UTC](https://discuss.cubepilot.org/t/herelink-air-unit-powered-from-kore/4561 "2020-09-09T14:35:10Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![RoboMotic](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/robomotic/32/947_2.png) [@RoboMotic](https://discuss.cubepilot.org/u/RoboMotic)\
**Post date:** [9 September 2020 14:35 UTC](https://discuss.cubepilot.org/t/herelink-air-unit-powered-from-kore/4561/1 "2020-09-09T14:35:10Z")

</div>

Hi!

The KORE has 2 power BEC, 5 and 12V.

Can I use them to power on the HereLink Air unit, or is too much power for the KORE ?

Thanks!

---

<div class="post-metadata">

**Author:** ![Alvin](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/alvin/32/1000_2.png) [@Alvin](https://discuss.cubepilot.org/u/Alvin)\
**Post date:** [10 September 2020 02:35 UTC](https://discuss.cubepilot.org/t/herelink-air-unit-powered-from-kore/4561/2 "2020-09-10T02:35:05Z")

</div>

Do you mean the raw 12V from power distribution and 5.3V from bridging JP1?

---

<div class="post-metadata">

**Author:** ![RoboMotic](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/robomotic/32/947_2.png) [@RoboMotic](https://discuss.cubepilot.org/u/RoboMotic)\
**Post date:** [10 September 2020 02:47 UTC](https://discuss.cubepilot.org/t/herelink-air-unit-powered-from-kore/4561/3 "2020-09-10T02:47:08Z")

</div>

I mean the J14 (5,3V) and J19 (12.2V)

thanks

---

<div class="post-metadata">

**Author:** ![Alvin](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/alvin/32/1000_2.png) [@Alvin](https://discuss.cubepilot.org/u/Alvin)\
**Post date:** [10 September 2020 09:40 UTC](https://discuss.cubepilot.org/t/herelink-air-unit-powered-from-kore/4561/4 "2020-09-10T09:40:05Z")

</div>

5.3V is too low for air unit. You need at least 6V to guarantee it works perfectly.  
For the J19, yes you can use it. But make sure voltage never exceed 12.6V

---

<div class="post-metadata">

**Author:** ![RoboMotic](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/robomotic/32/947_2.png) [@RoboMotic](https://discuss.cubepilot.org/u/RoboMotic)\
**Post date:** [10 September 2020 13:21 UTC](https://discuss.cubepilot.org/t/herelink-air-unit-powered-from-kore/4561/5 "2020-09-10T13:21:47Z")

</div>

great thanks!

what do you think about this?

[https://discuss.cubepilot.org/t/orange-cube-kore-2-herelink/4563/4](https://discuss.cubepilot.org/t/orange-cube-kore-2-herelink/4563/4)