# Herelink not connect

**URL:** <https://discuss.cubepilot.org/t/herelink-not-connect/8902>\
**Category:** HereLink\
**Created:** [18 May 2022 17:42 UTC](https://discuss.cubepilot.org/t/herelink-not-connect/8902 "2022-05-18T17:42:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![frank](https://discuss.cubepilot.org/letter_avatar_proxy/v4/letter/f/3d9bf3/32.png) [@frank](https://discuss.cubepilot.org/u/frank)\
**Post date:** [18 May 2022 17:42 UTC](https://discuss.cubepilot.org/t/herelink-not-connect/8902/1 "2022-05-18T17:42:28Z")

</div>

Hi everyone…. everything works ok at home… Herelink ok and responds to all commands according to the button mapping. I go to the airfield and Herelink is not recognized (Not connect)… I turn off / on everything but nothing three thousand times! I go home and see that the basic driving channels 1,2,3,4 work (from MP) but the app does not connect. I tried to redo the Pair but still zero! The version is 1.0.3. Yet in the system screen I see everything and it seems that the connection between the Remote Control and the Air Unit is there (see photo)…. is there something I don’t know? tonight I reload the firmware of RC and Air… do you have any advice?

 ![image](https://discuss.cubepilot.org/uploads/default/original/2X/3/309d3c287e1fa6e4a66b0c8cefc48f2e209e371b.jpeg) ![image](https://discuss.cubepilot.org/uploads/default/original/2X/3/3c3569c302ccdf195d9460216d88147c03379f3a.jpeg) ![image](https://discuss.cubepilot.org/uploads/default/original/2X/c/c18610a3cc905b2dd812e38bcf66d9dd7397888e.jpeg)

---

<div class="post-metadata">

**Author:** ![frank](https://discuss.cubepilot.org/letter_avatar_proxy/v4/letter/f/3d9bf3/32.png) [@frank](https://discuss.cubepilot.org/u/frank)\
**Post date:** [19 May 2022 12:24 UTC](https://discuss.cubepilot.org/t/herelink-not-connect/8902/2 "2022-05-19T12:24:59Z")

</div>

NOW CONNECT !!! 😃 😃

UPDATE

in full desperation, all I could do, after deleting any other variable, is to update the fw of both the RC and Air unit  
To my amazement (sorry but I didn’t know), version 1.0.4 has been downloaded (previously it was 1.0.3)

**So the question of the questions:** but is it not that Herelink behaves like DJI that in the event of an upgrade, blocks everything even if you are a million kilometers from home and you have been out for 5 days to do some surveys?