# Herelink v0 support for ip camera with gimbal

**URL:** <https://discuss.cubepilot.org/t/herelink-v0-support-for-ip-camera-with-gimbal/9729>\
**Category:** HereLink\
**Created:** [26 September 2022 19:09 UTC](https://discuss.cubepilot.org/t/herelink-v0-support-for-ip-camera-with-gimbal/9729 "2022-09-26T19:09:34Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Farkhod\_Khikmatov](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/farkhod_khikmatov/32/5933_2.png) [@Farkhod\_Khikmatov](https://discuss.cubepilot.org/u/Farkhod_Khikmatov)\
**Post date:** [26 September 2022 19:09 UTC](https://discuss.cubepilot.org/t/herelink-v0-support-for-ip-camera-with-gimbal/9729/1 "2022-09-26T19:09:34Z")

</div>

Hello I was just building this experimental uav

I did not realize that I had purchased the v1 and not v2 herelink which supported this gimbal. It is viewlink gimbal, that comes with ip camera but does not have HDMI output. Is there any way I could use ax88179 chipset to convert it to HDMI? I really need help setting this up. Thank you!

 ![PXL_20220926_190428929](https://discuss.cubepilot.org/uploads/default/original/2X/3/3d70e1b855f9992eb8d5de2e08166a3895725b31.jpeg)  
 ![Screenshot_20220918-141313~3](https://discuss.cubepilot.org/uploads/default/original/2X/3/314336001a8d09e963a2f36610fdfa52dc3b0267.png)  
I was thinking of using this diagram, but I don’t don’t if this will actually work.

---

<div class="post-metadata">

**Author:** ![Farkhod\_Khikmatov](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/farkhod_khikmatov/32/5933_2.png) [@Farkhod\_Khikmatov](https://discuss.cubepilot.org/u/Farkhod_Khikmatov)\
**Post date:** [27 September 2022 14:47 UTC](https://discuss.cubepilot.org/t/herelink-v0-support-for-ip-camera-with-gimbal/9729/2 "2022-09-27T14:47:49Z")

</div>

Please help someone

---

<div class="post-metadata">

**Author:** ![frame](https://discuss.cubepilot.org/letter_avatar_proxy/v4/letter/f/d07c76/32.png) [@frame](https://discuss.cubepilot.org/u/frame)\
**Post date:** [28 September 2022 20:49 UTC](https://discuss.cubepilot.org/t/herelink-v0-support-for-ip-camera-with-gimbal/9729/3 "2022-09-28T20:49:27Z")

</div>

Ethernet passthrough does work - given that you have compatible usb ethernet adapters and please note that on air unit you need to power it externally.

See these threads:

> [@Herelink Ethernet](https://discuss.cubepilot.org/t/herelink-ethernet/4369/5):
>
> when you say ground side? thats the wifi ip ground side?

> [@Herelink Ethernet compatible hardware](https://discuss.cubepilot.org/t/herelink-ethernet-compatible-hardware/4451):
>
> Much like the Camera thread, this is a place to report known working adapters for using Ethernet pass - through. Booting up with a compatible adapter at each end will result in a transparent connection, just as a physical Ethernet cable would. These have been tested with the Beta Channel, SRU01200616 If it doesn’t just work there is some debugging steps outlined here: At both ends you will need a OTG Ethernet adapter or a standard USB with a OTG to USB adapter. On the air side you will also…

I have used Asix AX8817X based usb 2.0 ethernet adapters successfully - but there are also couple of other chipset versions supported I guess.

---

<div class="post-metadata">

**Author:** ![Michael\_Oborne](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/michael_oborne/32/13_2.png) [@Michael\_Oborne](https://discuss.cubepilot.org/u/Michael_Oborne)\
**Post date:** [29 September 2022 12:06 UTC](https://discuss.cubepilot.org/t/herelink-v0-support-for-ip-camera-with-gimbal/9729/4 "2022-09-29T12:06:26Z")

</div>

yes its possible, No its not recommended.  
herelink tightly controls the video bitrate, to archive long distance video, the ip camera solution does not, and is likely to have issues at longer range.

---

<div class="post-metadata">

**Author:** ![Farkhod\_Khikmatov](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/farkhod_khikmatov/32/5933_2.png) [@Farkhod\_Khikmatov](https://discuss.cubepilot.org/u/Farkhod_Khikmatov)\
**Post date:** [29 September 2022 14:24 UTC](https://discuss.cubepilot.org/t/herelink-v0-support-for-ip-camera-with-gimbal/9729/5 "2022-09-29T14:24:48Z")

</div>

Just to be clear this is the v0 and not v1.1 it does not have Ethernet port. For v0 should I use the HDMI port or USB port? Sorry for a noob question 😅

---

<div class="post-metadata">

**Author:** ![nacy](https://discuss.cubepilot.org/letter_avatar_proxy/v4/letter/n/df705f/32.png) [@nacy](https://discuss.cubepilot.org/u/nacy)\
**Post date:** [29 September 2022 16:22 UTC](https://discuss.cubepilot.org/t/herelink-v0-support-for-ip-camera-with-gimbal/9729/6 "2022-09-29T16:22:36Z")

</div>

Herelink video compression performance is very good, so can i use air unit as video encoder (without ground unit)? Direct access h.264 video over ethernet port on air module v1.1?
