# Mission Planner does not display PingSonar measurements

**URL:** <https://discuss.cubepilot.org/t/mission-planner-does-not-display-pingsonar-measurements/10623>\
**Category:** Mission Planner\
**Created:** [24 February 2023 13:53 UTC](https://discuss.cubepilot.org/t/mission-planner-does-not-display-pingsonar-measurements/10623 "2023-02-24T13:53:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bartosz\_Łarzewski](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/bartosz_%C5%82arzewski/32/6422_2.png) [@Bartosz\_Łarzewski](https://discuss.cubepilot.org/u/Bartosz_%C5%81arzewski)\
**Post date:** [24 February 2023 13:53 UTC](https://discuss.cubepilot.org/t/mission-planner-does-not-display-pingsonar-measurements/10623/1 "2023-02-24T13:53:35Z")

</div>

Hello,

My problem is the PingSonar made by BlueRobotics is working properly, has good version of firmware etc. but in Mission Planner in “STATUS” parameter “sonarrange” is always 0.

I also can not find all parameters to tune. I found and set parameters: SERIAL2\_PROTOCOL SERIAL2\_BAUD RNGFND1\_TYPE, but i can not find RNGFND1\_MIN\_CM, RNGFND1\_ORIENT and RNGFND1\_MAX\_CM.

I install mission planner latest version today, I do not know is it a good version to handle PingSonar

Greetings,  
Bartosz Łarzewski.

---

<div class="post-metadata">

**Author:** ![Bartosz\_Łarzewski](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/bartosz_%C5%82arzewski/32/6422_2.png) [@Bartosz\_Łarzewski](https://discuss.cubepilot.org/u/Bartosz_%C5%81arzewski)\
**Post date:** [24 February 2023 13:58 UTC](https://discuss.cubepilot.org/t/mission-planner-does-not-display-pingsonar-measurements/10623/2 "2023-02-24T13:58:42Z")

</div>

I forgot to write version of my Autopilot: it has px4 sign with black cude.

My echosounder is connected to TELEM2 port, all cables are plugged correctly.
