# Orange Cube - Kore Carrier - Batt Voltage and Current Monitoring

**URL:** <https://discuss.cubepilot.org/t/orange-cube-kore-carrier-batt-voltage-and-current-monitoring/7280>\
**Category:** Mission Planner\
**Created:** [12 September 2021 14:35 UTC](https://discuss.cubepilot.org/t/orange-cube-kore-carrier-batt-voltage-and-current-monitoring/7280 "2021-09-12T14:35:24Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![steveicus](https://discuss.cubepilot.org/letter_avatar_proxy/v4/letter/s/7feea3/32.png) [@steveicus](https://discuss.cubepilot.org/u/steveicus)\
**Post date:** [12 September 2021 16:16 UTC](https://discuss.cubepilot.org/t/orange-cube-kore-carrier-batt-voltage-and-current-monitoring/7280/3 "2021-09-12T16:16:06Z")

</div>

@manavgandhi17 looks like it. I also need to do a reboot, and now I see the variables.

Additionally, I had a negative current reading and followed @doug instructions to correct this and I am getting decent current numbers.

> [@Negative Current Reading on Kore Carrier Board](https://discuss.cubepilot.org/t/negative-current-reading-on-kore-carrier-board/2299/11):
>
> I think i have found a reason, Yesterday i tried 3 different cubes with 5 different Kore boards slight_smile With using brand new Kore boards rev 1.4. A (which has a sticker on it, newly bought ones) current reading is -3,7A, and -3,9A With using my old Kore boards rev 1.4.B (which i bought about 9 months ago) current reading is 0 and 0.1A I think there is a problem on current reading of rev A Kore boards. Interesting part is that i bought these guys recently.

---

_[View the full topic](https://discuss.cubepilot.org/t/orange-cube-kore-carrier-batt-voltage-and-current-monitoring/7280)._