# OSD module for CUBE FC's **URL:** \ **Category:** Cube Autopilot\ **Created:** [26 August 2020 08:29 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429 "2020-08-26T08:29:26Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![steviegeek](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/steviegeek/32/1182_2.png) [@steviegeek](https://discuss.cubepilot.org/u/steviegeek)\ **Post date:** [26 August 2020 08:29 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/1 "2020-08-26T08:29:26Z")
Hi, Can anybody recomend an OSd module that supports the message set from CUBE Orange, in particular mesages such as battery 2 voltage/current, GPs2 etc. ? i have the Radiolink connected at moment but only one EN character set available which does not display the symbols and can only select basic messages. Thinking of trying the Holybro OSD v2 but it looks to be the same technology and config software. What are people using these days? Thanks Steve 🙂 ---
**Author:** ![Mallikarjun\_SE](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/mallikarjun_se/32/7496_2.png) [@Mallikarjun\_SE](https://discuss.cubepilot.org/u/Mallikarjun_SE)\ **Post date:** [26 August 2020 09:36 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/2 "2020-08-26T09:36:40Z")
Hey Stephen! Google MinimOSD. You’ll find lot of them. This is the link for setting it up! [https://ardupilot.org/copter/docs/common-minim-osd-quick-installation-guide.html](https://ardupilot.org/copter/docs/common-minim-osd-quick-installation-guide.html) ---
**Author:** ![steviegeek](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/steviegeek/32/1182_2.png) [@steviegeek](https://discuss.cubepilot.org/u/steviegeek)\ **Post date:** [26 August 2020 16:30 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/3 "2020-08-26T16:30:23Z")
Thanks Malik, The Radiolink thing I’ve got is basically one of those but seems locked to it’s own config tool, others cannot read the bootloader. I’ve order this one today > **[ArduPilot Mega Minim OSD v1.2](https://www.unmannedtechshop.co.uk/product/ardupilot-mega-minim-osd-v1-2/)** > > This is the new MinimOSD board with KV team mods.  This means that this board is compatible with the newer KV team mod firmware (Rush OSD) that is compatible with multiwii boards.  The mi… I’m hoping it runs either KV Team/RUSH or Minim-OSD Extra firmware and config GUI and… then hoping it picks up all the messages. I’ll post up the results 😁 Cheers Steve 🙂 ---
**Author:** ![Mallikarjun\_SE](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/mallikarjun_se/32/7496_2.png) [@Mallikarjun\_SE](https://discuss.cubepilot.org/u/Mallikarjun_SE)\ **Post date:** [26 August 2020 17:23 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/4 "2020-08-26T17:23:12Z")
The last time I used OSD was in 2013. Anyways, keep me posted! 😁 ---
**Author:** ![davidbitton](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/davidbitton/32/19_2.png) [@davidbitton](https://discuss.cubepilot.org/u/davidbitton)\ **Post date:** [26 August 2020 17:29 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/5 "2020-08-26T17:29:03Z")
I’m using [MWOSD](https://tro.pe/31wC0LU) on a MinimOSD. It’s really easy to setup. Check it out. ---
**Author:** ![steviegeek](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/steviegeek/32/1182_2.png) [@steviegeek](https://discuss.cubepilot.org/u/steviegeek)\ **Post date:** [26 August 2020 20:12 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/6 "2020-08-26T20:12:34Z")
Hi, just had a look through this, It’s certainly come on a long way since I last uused it, about 2015 if my grey matter serves me well. I’ll load it up tomorrow, Thank you Steve 🙂 ---
**Author:** ![philip](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/philip/32/9035_2.png) [@philip](https://discuss.cubepilot.org/u/philip)\ **Post date:** [27 August 2020 23:22 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/7 "2020-08-27T23:22:46Z")
Steer clear of anything radiolink, they tend to do things their own way, which screws with compatibility. ---
**Author:** ![xfacta](https://discuss.cubepilot.org/letter_avatar_proxy/v4/letter/x/5f8ce5/32.png) [@xfacta](https://discuss.cubepilot.org/u/xfacta)\ **Post date:** [28 August 2020 06:20 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/8 "2020-08-28T06:20:13Z")
The mavlink OSD for Hobbyking works, and it’s very small. It works with the Nightghost mavlink firmware - dont use the PX4 version. > **[Micro HKPilot OSD MAVlink Compatible Micro On-Screen Display](https://hobbyking.com/en_us/micro-hkpilot-osd-mavlink-compatible-micro-on-screen-display.html?queryID=3c0936ebf9fb25eb358aedf1518e76de&objectID=19780&indexName=hbk_live_magento_en_us_products)** > > Micro HKPilot OSD MAVlink Compatible Micro On-Screen Display ---
**Author:** ![steviegeek](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/steviegeek/32/1182_2.png) [@steviegeek](https://discuss.cubepilot.org/u/steviegeek)\ **Post date:** [28 August 2020 20:30 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/9 "2020-08-28T20:30:29Z")
Agreed, It’s in the trashcan already. 😁 Holybro unit being delivered tomorrow 👍 Steve 🙂 ---
**Author:** ![steviegeek](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/steviegeek/32/1182_2.png) [@steviegeek](https://discuss.cubepilot.org/u/steviegeek)\ **Post date:** [28 August 2020 20:33 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/10 "2020-08-28T20:33:04Z")
Thanks It looks the same/similiar hardware as the Holybro unit I’ve got the Nightghost firmware ready togo on it Cheers Steve 🙂 ![image](https://discuss.cubepilot.org/uploads/default/original/2X/6/61addd4e01e8ad07a442f7e226b7e2a4e934844f.jpeg) ![image](https://discuss.cubepilot.org/uploads/default/original/2X/5/5ff7fc0c9d6396569dff7fd33b75497d6dd91d35.jpeg) ---
**Author:** ![chrisgray](https://discuss.cubepilot.org/letter_avatar_proxy/v4/letter/c/ba9def/32.png) [@chrisgray](https://discuss.cubepilot.org/u/chrisgray)\ **Post date:** [4 October 2020 23:34 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/11 "2020-10-04T23:34:55Z")
Stephen, I really feel your pain on OSD for Pixhawk and Cube. I am an Eagletree Vector FC user and the OSD on this FC is what I would consider the “Gold standard”. Unfortunately, Eagletree has gone out of business and I am switching to Pixhawk, but cannot find an OSD (that is available anymore) with the features/capabilities. The ones mentioned on this thread are all, unfortunately, very very poor. I certainly would be interested in finding one that is available. The one that I like, but I am not sure is available is XtremeOSD: [http://www.xtremecopters.com/home/index.php/products/ct-menu-item-5/xtreme-osd](http://www.xtremecopters.com/home/index.php/products/ct-menu-item-5/xtreme-osd) Another that looked promising is AlceOSD: [https://sites.google.com/site/alceosd/get-one](https://sites.google.com/site/alceosd/get-one) But I am not sure if any of these companies are selling anymore. It seems like the OSD market for FPV is disappearing. Chris ---
**Author:** ![philip](https://discuss.cubepilot.org/user_avatar/discuss.cubepilot.org/philip/32/9035_2.png) [@philip](https://discuss.cubepilot.org/u/philip)\ **Post date:** [27 October 2020 12:26 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/12 "2020-10-27T12:26:56Z")
we are following here with interest. we cannot get the OSD chip anymore, so cannot do the Minim style unit, if we did one, it would need to be a completely new system ---
**Author:** ![Cliff347](https://discuss.cubepilot.org/letter_avatar_proxy/v4/letter/c/96bed5/32.png) [@Cliff347](https://discuss.cubepilot.org/u/Cliff347)\ **Post date:** [7 December 2022 06:39 UTC](https://discuss.cubepilot.org/t/osd-module-for-cube-fcs/4429/13 "2022-12-07T06:39:33Z")
Digital Micro Devices is worth looking into. I use there equipment on the Cube Black and Orange with great results. [https://dmd2.es/ds\_xosd\_obj/](https://dmd2.es/ds_xosd_obj/) Cliff