LiDAR Lite v3 is connected but not publishing distance data

I have a LIDAR Lite and a PX4Flow onboard my drone, I tried connecting both to the same I2C board but both wouldn’t show up so I instead connected the LIDAR to the I2C on the GPS1 port instead. The PX4Flow is printing data fine but the LiDAR is printing nothing, does anyone know why?

Also, I did originally have the LiDAR connected to PWM but I changed over to the mini carrier board and I tried to get it working with PWM on it but I couldn’t find anything online about it, if anyone knows either how to connect the LiDAR through PWM on the mini carrier board or the above then that would be great.