Orange Cube is not detected anymore

[varunburde]

Hello, I checked the cable is working fine with other devices. A solid orange led is turned on when connected via USB as well as from power via battery. The 433 MHz radio also turn ON which is connected with ads-b carrier board.

I am sorry to interrupt I think I might have something similar kind of issue as this

pixhawk orange cube does not start

Have you downloaded the correct version ? How does it look in the comports in device manager ? I would try a Cube orange version of the daily build and then see and make sure there is the correct drivers showing. I wrote a post on the docs section to help with this. https://docs.cubepilot.org/user-guides/autopilot/the-cube-series-firmware-and-connection-troubleshooting

I was reading about bootloaders, the PX4 use different bootloader(NUTTX) then ardupilot(ChibiOS). I think I messed the bootloader that’s why the cube isn’t booting .

Can you suggest something something else I can do other than the solution they had ( other than soldering ).

Thank you very much for help