Cube Orange+ not detected in device manager

[CraigElder]

Sounds like you attempted to update the bootloader and bricked the Cube
This is how to update the bootloader using DFU

How to activate DFU Mode on Cube Orange+

With @sidbh’s help I was able to rewrite the standard bootloader (and then upload ArduPilot) to an autopilot so I’d like to share how it was done. Purchase an STLinkv2 (search on amazon) Ensure you have an ArduPilot build environment setup If using Windows PC running WSL2 (and VSCode) as I do then you will need to download and install WSL USB Manager to allow WSL2 to access the PC’s USB ports Open the Cube’s carrier board and connect to the STLink as shown below [stlink-cube-wiring-corrected] …