i have standalone video test app you could try, but you need to install in developer mode
1 Like
Thanks Michael for the app.
I was wondering if after installation I would have some incompatibilities with Solex o GCS.
The app is a Mission Planner version for Herelink or only a video test?
only video test, but maybe a sample as well.
2 Likes
Thx! I’ll take a look.
Hi @Michael_Oborne, @MadRC
New issues with the Herelink… is my nightmare. After wait three months to repair and receive the Herelink by a scroll defective, I needed to update all modules. But, here is the list of issues:
- Solex not detect HDMI ports (tested with three cameras working on QGC)
- @Michael_Oborne I tested your app and all cameras works fine. THANKS!
- It’s impossible to arm the copter in Stabilize mode. (throttle too high)
a. I tried enabling/disabling throttle center zero.
b. WBus1 and WBus2
c. Changing the mode of the sticks to mode 3 and 4.
d. Reversing RZ channel.
I only arm without GPS pos in alt hold.
Versions: Arducopter 4.0.3
Herelink: SRU01200616
Air Unit: AU01200226
QGC: Development herelink-v3.5.6 2020-02-11
Android 7.1.2
SOLVED SOLEX HDMI: After reinstall Air unit Firmware works.
Hey there,
I have issues with Solex and video streaming as well 
Air and Remote Unit flashed to the newest version, using a GoPro 4 Black.
If I start Solex first, then turn on the Air unit and afterwards connect the running GoPro to the Air unit nothing happens (LED1 off). After I start QGC, it takes 4 seconds and the video stream starts (LED1 Green).
However, if I go back to Solex I still have no video…
Update: After removing the touchscreen of the GoPro, LED1 turns green after starting Solex. Still, livestream is not working. I have to add that no autopilot is connected yet.
Hi guys,
I am using GoPro7 and am facing the following issues:
- Solex has no video feed; and
- QGC - video feed freezes when I try to record
I have updated the GC as well as air unit.
Please help.
The settings in gopro will not help. It seems the feed depends on the orientation of camera in this mode.
I have changed the mounting so that the camera is not upside down.
do you have a autopilot connected?
I too Face similar problem with herelink
On connecting gopro hero 7 with herelink,
no video in solex and video freezes when try to record in QGCS.
And i have connected with Cube_orange
So I tried changing the video settings on go pro to 1080 - 30 or 60 fps, and I directly start Solex after booting Herelink.
This seems to solve the problem of getting video on Solex and I can properly record video as well.
However on QGC the video freezes when I try to record.
Yes I am using the Cube Orange with latest Arducopter firmware.
Did this ever get resolved?
The Link from above to the video test app do not work anymore. - Can You please put the APP downloadable again?
@all: I am trying to solve my video-issues and this is the only thread with helpful information i can find. Are there some news on this topic?
Regards,
Matthias
I would love to test Mission Planner too!
ive fixed the link above so it works again
you can grab a copy of missionplanner for android from
you need to be signed into github to get it
When is the next update that will resolve all of this?
Where should we first send or post our adb bug reports from Herelink to review?
Having issues described above with video stream dropping in flight, and unable to reestablish feed. checked and double checked recommended points of failure. Got to dig deeper and would greatly appreciate a review of bug reports for any recommendations of next course of action. Thanks
its being prepared at the moment.
we plan a simple update, then a larger second update that adds new features