Here GPS


Topic Replies Views Activity
Here 2 can update

Here2 CAN Mode Instruction Here2 Default factory setting is CAN mode with UAVCAN Protocol. Default Here2 CAN mode has three devices on CAN bus: GPS, magnetic compass, and barometer. The safety switch is not workable und…

212 14168 November 22, 2020
About the Here GPS category
0 444 December 26, 2018
Here 3 stopped working when updating firmware
2 35 June 15, 2021
Here2 in detail Integration
3 64 June 11, 2021
Here 3 parameters missing after activate passThrough
1 26 June 10, 2021
Here3 I2C connection
3 41 June 7, 2021
Here3 Connected Sats lower than Here2
3 60 June 7, 2021
Introducing Here3!
35 2076 June 6, 2021
Here3 not responding
2 64 May 17, 2021
Reading Here2 Message
1 37 May 17, 2021
Here2 and Here3 CAN RTK problem
1 54 May 17, 2021
RTK GPS with Internal Barometer
3 40 May 12, 2021
Compass interference
21 488 May 11, 2021
Here3 IMU 3or6 degrees of freedom?
5 102 May 2, 2021
Info about beta settings for Here3 GPS
6 80 April 23, 2021
Ublox params go to default after power cycle
1 55 April 22, 2021
Here2 in maintenance mode/critical health
1 37 April 8, 2021
Problem setup here3 GPS (CAN) and Emlid M2 as 2nd GPS
8 163 April 7, 2021
Here3 default bootloader
1 60 March 31, 2021
Here3/HerePro?
3 428 March 30, 2021
Loss of all satellites on HERE 2 GNSS in-flight
39 2317 March 25, 2021
Here2 led problem
5 49 March 25, 2021
Here3 gps firmware update fail
5 137 March 23, 2021
Constant 1cm precision with Here+V2 possible?
1 67 March 18, 2021
Here2 mid-air failure
2 63 March 13, 2021
Here3 firmware not complete
1 83 March 12, 2021
Here3 GPS needs to be unplugged and re-pluggged everytime I power on quadcopter (with Herelink, PX4, Orange cube)
9 421 March 10, 2021
Can you use Here3 with RTK for surveying
3 102 March 9, 2021
Here 2 Temp Limits
1 62 March 8, 2021
Unexplained start failure: Here3 on CAN
8 203 March 6, 2021